Phone:+86-512-52566788
+86-18015551990
Auto Edge Taping

Semi Automatic Tape Box Carton Sealing Machine

Short Description:

Item Parameter
Panel Size (1680-2650)*(992-1500)mm
Cycle time ≤20S
Tape length Compatible with most tape specifications on the market

Product Detail

Product Tags

Specification

500MW HC* FULLY AUTOMATIC PRODUCTION LINE

Fully automated production line fully equipped and complete with all top of the range machines. Made to fit your production floor with only 3 workers needed in line.

Profit from a smooth and continuous assembly of solar panels, and today it is possible to keep the quality of the panels monitored at all times with an AI defects detection system plus our ECO MES system to monitor the production anytime and anywhere.

Item  Parameter
Panel Size (1680-2650)*(992-1500)mm
Cycle time ≤20S
Tape length Compatible with most tape specifications on the market
Tape width 25mm-40mm
Tape roll specifications diameter<300mm
panel positioning accuracy <1    mm
Alignment method Cylinder block
tape change time Convenient and fast, use time <2min
Edge taping effect No wrinkles, wavy lines, or damage
panel switching time ≤30min
Overall dimensions:(L*W*H) 4100X22900X1850 mm
Voltage 3Phase 5 wire 380V,50Hz,AC±20%
Power 6KW
Air Pressure 0.6~0.8Mpa

Technical Performance

1. The tape is compatible with most general-purpose tapes on the market with an outer diameter of less than 300mm.

2. The panel lifting part adopts four cylinders to lift, and the pressure wheel part can be fine-tuned, which is convenient for installation and debugging.

3. Edge taping accuracy: ≤±1mm (starting position).

4. Edge taping thickness: the thickness range of compatible panels is 4-7mm, and it can be customized beyond the range.

5. Edge taping length: Compatible with full-sealing tape and four-corner half-sealing tape.

Main Features

New ETS 4000 Stringer machine compatible with full, half-cut and triple-cut solar cells

Embedded cell laser cutting unit for half-cut cells

Production fully compatible with bigger solar cells: M6 (166mm), M10 (182mm), M12 (210mm) in full, half and third cut (tooling replacement is required for cells with different bus bar inter-axis);

Works with 5, 6, 9, 10, 11, 12 BB and 15BB and wires;

Fully automatic j-box application & soldering system;

Automatic bussing with centralized soldering unit for half-cut/twin peak panels;

Works with module's sizes up to 2.65m x1.5m (and 2.65m x1.5m as optional);

Cycle time: ≤20s


  • Previous:
  • Next:

  • Write your message here and send it to us