|String Positioning Accuracy||±0.2mm|
|Voltage||3Phase 5 wire 380V,50Hz,AC±20%|
The easiest production line to scale up, benefit from a modular design of the line, start small and grow later on. Made to fit your production floor with only 6 workers needed in line.
Profit from a smooth and continuous assembly of solar panels, and today it is possible to keep the quality of the panels monitored at all times with an AI defects detection system plus our ECO MES system to monitor the production anytime and anywhere.
1.Non-contact CCD positioning.
2.With Automatic barcode placement function.
3.String output belt with servo motor.
4.Full cell /Half cell panel switching time: one-key switching.
5.Connect with Stringer in the market to meet A/B string.
6.Satisfy the single-track 12 stringing mode of the stringer.
7.With manual feed port for rework string, which can meet A/B string.
8.Compatible with horizontal&vertical type panel.
New ETS 2500 Stringer machine compatible with full, half-cut and triple-cut solar cells
Embedded cell laser cutting unit for half-cut cells
Production fully compatible with bigger solar cells: M6 (166mm), M10 (182mm), M12 (210mm) in full, half and third cut (tooling replacement is required for cells with different bus bar inter-axis);
Works with 5, 6, 9, 10, 11, 12 BB and 15BB and wires;
Automatic bussing with centralized soldering unit for half-cut/twin peak panels;
Works with module's sizes up to 2.65m x1.5m (and 2.65m x1.5m as optional);
Cycle time: ≤20s