Auto EVA Layup  Machine

Main cutting materials: ribbon, ribbon tape, small webbing

Short Description:

Item Parameter
Panel Size (1680-2650)*(992-1500)mm
Cycle time 20S
Cutting Accuracy ±1.5mm

Product Detail

Product Tags


Item  Parameter
Panel Size (1680-2650)*(992-1500)mm
Cycle time 20S
Cutting Accuracy ±1.5mm
Laying Accuracy ±1.5mm
Overall dimensions:(L*W*H) 6000*2320*2000
Voltage 3Phase 5 wire 380V,50Hz,AC±20%
Power 5KW
Air Pressure 0.5Mpa-0.7Mpa
Maximum Material Roll Diameter ≤800mm

Technical Performance

1.Standard configuration hot melt, tailings will not fall off the machine.

2.Auto correction, auto detection of joints, auto throwing.

3.Hob cutting method, non-stick knife.

4.Auto hole punching, accurate hole punching.

5.Punching tools can be customized according to customer requirements (example: flat hole, original hole, oval hole).

Product Introduction

Function description

The overall structure is composed of EVA, TPT It is composed of feeding and deviation correction mechanism, EVA hot melt welding mechanism (optional), punching mechanism (optional), cutting mechanism, glass straightening mechanism, pulling and laying mechanism, etc.

Servo bus control is adopted, with higher precision and stability

Equipped with EVA hot melt welding system, it can facilitate rapid refueling, reduce refueling time and improve production efficiency.

Technical performance of equipment

Design beat ≤ 25s / sheet_
Cutting accuracy EVA cutting length error + 2mm, TPT cutting length error + 1mm
Laying accuracy  Laying accuracy ≤ + 2mm
Refueling time ≤ 5min
Switching time of different board types One key switching
Operation mode Manual + automatic
Noise requirement ≤ 60dB_
Man machine interface Chinese and English mode

  • Previous:
  • Next:

  • Write your message here and send it to us