Phone:+86-512-52566788
+86-18015551990
300MW PV Module Line
HORAD is a national high-tech enterprise specializing in the development, design, production, sales and related services of complete sets of high-end automation equipment.

300MW PV Module Line

  • Auto Hi Pot Tester

    Auto Hi Pot Tester

    Item Parameter Panel type Glass-Backsheet&Glass-Glas type, Shingled type Panel Size (1680-2650)*(992-1500)mm Cycle Time 14S High Pressure Resistant AC:5kVAC @40mA DC:6kVDC @20mA Electricity 0.01-12.00mAac 0.001-5.000mAdc Overall dimensions:(L*W*H) 3700*1820*1765(2 layer),3020*1820*1400(single layer) Voltage AC 200V or 380V,AC±10%,50±0.5HZ Power ≤1KW/H Air Pressure 0.8Mpa 1,Conduct insulation performance, withstand voltage performance, and groundin...
  • Curting Room

    Curting Room

    Item Parameter Panel type Glass-Backsheet&Glass-Glas type, Shingled type Panel Size (1680-2650)*(992-1500)mm Cycle time ≤22S Working Mode Motor provides power, sprocket and chain drive Voltage 3Phase 5 wire 380V,50Hz,AC±20% Power ≤5KW/h Air Pressure no Working temperature Working humidity 1, Running smoothly 2, Compact structure
  • Automatic Trimming

    Automatic Trimming

    Item Parameter Panel Size (1680-2650)*(992-1500)mm Cycle time ≤20S Tailing method Motor coil/cylinder clamp knife replacement time ≤180s Life of knife ≥100000 times positioning accuracy ±1mm Fragmentation rate ≤0.001% (monthly average) Block return The front cylinder blocks, the cylinders on both sides are normalized Glass type (1580-2650)*(1000-1500)mm Overall dimensions:(L*W*H) 3450mm*2360mm*1550mm Voltage 3Phase 5 wire 380V,50Hz,AC±20% Power 4kw Air...
  • EVA Backsheet Cutting & Placing

    EVA Backsheet Cutting & Placing

    Item Parameter Panel Size (1680-2650)*(992-1500)mm Cycle time 20S Cutting Accuracy ±1.5mm Laying Accuracy ±1.5mm Overall dimensions:(L*W*H) 6000*2320*2000 Voltage 3Phase 5 wire 380V,50Hz,AC±20% Power 5KW Air Pressure 0.5Mpa-0.7Mpa Maximum Material Roll Diameter ≤800mm 1.Standard configuration hot melt, tailings will not fall off the machine 2.Auto correction, auto detection of joints, auto throwing 3.Hob cutting method, non-stick knife 4.Auto hole punc...
  • Auto Taping Machine

    Auto Taping Machine

    Item Parameter Cell Size 156-230 Panel Size (1680-2650)*(992-1500)mm Cycle time 20s (for 28 points) Tape width &length L:15*22 W:5-10 Compatible with centrifugal paper tape Panel positioning accuracy ±0.5mm Tape replacement time 2min Taping positioning accuracy ±0.5mm Switch time 5min Glass Specifications 1640-2650*985*1500 Overall dimensions:(L*W*H) 3150*1920*1800 Voltage 3Phase 5 wire 380V,50Hz,AC±20% Power 4KW Air Pressure 0.8Mpa 1.Simple an...
  • Robot String Layup

    Robot String Layup

    Item Parameters Cell Specifications 156mm*156mm-210mm*210mm Panel Size (1680-2650)*(992-1500)mm Cycle time ≤6s/string String Positioning Accuracy ±0.2mm Glass Size (1680-2650)*(992-1500)mm Overall dimensions:(L*W*H) 4220*2920*2900mm Voltage 3Phase 5 wire 380V,50Hz,AC±20% Power 3kw Air Pressure 180L/min 1.Non-contact CCD positioning 2.With Automatic barcode placement function 3.String output belt with servo motor 4.Full cell /Half cell panel switching t...
  • Auto Glass Feeding

    Auto Glass Feeding

    Item Parameter Panel Size (1680-2650)*(992-1500)mm Cycle time ≤20S Glass Positioning Accuracy ≤±1mm Overall dimensions:(L*W*H) L7600*W3900*H2050 Voltage 3Phase 5 wire 380V,50Hz,AC±20% Power ≤5KW Air Pressure 0.6~0.7Mpa 1.Satisfy the size of 150P (3.2mm) glass, and it can be switched directly and seamlessly between 2 pallets. 2.Separate paper recycling function 3.Compatible with different specifications and models of glass 4.Avoid dust falling back to the ...
  • EL&VI tester

    EL&VI tester

    Item Parameter
    Panel Size (1680-2650)*(992-1500)mm
    Cycle time 20S
    Camera chip Sony
  • Automatic Edge Taping Machine

    Automatic Edge Taping Machine

    Item Parameter
    Panel Size (1680-2650)*(992-1500)mm
    Cycle time ≤20S
    Tape length Compatible with most tape specifications on the market
  • Auto EVA Layup  Machine

    Auto EVA Layup Machine

    Item Parameter
    Panel Size (1680-2650)*(992-1500)mm
    Cycle time 20S
    Cutting Accuracy ±1.5mm
  • 1st EVA  Cutting&Layup

    1st EVA Cutting&Layup

    Item Parameter
    Panel Size (1680-2650)*(992-1500)mm
    Cycle time 20S
    Cutting Accuracy ±1.5mm
  • Auto Glass Loading

    Auto Glass Loading

    Item Auto Glass Loading
    Panel Size (1680-2650)*(992-1500)mm
    Cycle time ≤20S
    Glass Positioning Accuracy ≤±1mm
12 Next > >> Page 1 / 2